The Tavor® X95 is uniquely convertible to .300 AAC Blackout. Please note this kit only works with the Tavor® X95™. The caliber conversion kit includes: Tavor® X95 .300 Blackout 16.5″ barrel – cold hammer forged, CrMoV, chrome lined, 1:8″ twist A2 flash suppressor Right or left hand bolt Recoil mechanism A full-length flattop Picatinny rail with gas regulator Deflector frame (for conversion from 9mm to .300 AAC Blackout) Tavor® barrel wrench One Black Magpul PMAG® Gen M3 30 Round with Window Please follow the following steps in the included Tavor® X95 manual (P/N: 08011021600 Rev.: C or D) in order to install your .300 Blackout kit: Section 14.1.3 Sear MechanismSection 14.1.4 Recoil MechanismSection 14.1.6 Foregrip GroupSection 14.1.7 Cocking Bar AssemblySection 14.1.8 Barrel-Rail Group For .300 Blackout conversion from 5.56 NATO:1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector For .300 Blackout conversion from 9mm:1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector and deflector frame2. Follow section 14.2.5 Magazine Adapter Assembly to uninstall the 9mm magazine adapter assembly Removing your barrel without completing Sections 14.1.3 – 14.1.7 first will damage your barrel. Warning: You must use the new barrel with the provided bolt to ensure headspacing is correct. Failure to do so may result in a catastrophic failure of your barrel and/or bolt and cause destruction of property, personal injury and/or death to you or bystanders.  If you are using any other rev. level of Tavor® X95 manual please follow the following steps in order to install your .300 Blackout kit: Section 14.1.2 Sear MechanismSection 14.1.3 Recoil MechanismSection 14.1.5 Foregrip GroupSection 14.1.6 Cocking Bar AssemblySection 14.1.7 Barrel-Rail Group For .300 Blackout conversion from 5.56 NATO:1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector For .300 Blackout conversion from 9mm:1. Follow section 14.2.4.1  Deflector & Deflector Frame to install the  5.56 NATO/.300 Blackout deflector and deflector frame2. Follow section 14.2.5 Magazine Adapter Assembly to uninstall the 9mm magazine adapter assembly